HEART OF AMERICA Seed Bead Pin

                 Materials Needed:
                 One       -   #2 (1 1/2" long) Brass Safety pin
                 Thirteen  - #0 (7/8" long)   Brass Safety pins

                 Bead the small pins as follows:

                 First pin: 1 red, 6 Ice (clear), 1 red
                 Second pin: 8 ice
                 Third pin: 2 ice, 2 blue, 1 red, 3 clear
                 Fourth pin: 1 ice, 3 blue, 2 white, 2 clear
                 Fifth pin: 1 ice, 3 blue, 3 red, 1 ice
                 Sixth pin: 1 ice, 3 blue, 3 white, 1 ice
                 Seventh pin: 2 ice, 2 blue, 4 red
                 Eighth pin: 1 ice, 3 blue, 3 white, 1 ice
                 Ninth pin: 1 ice, 3 blue, 3 red, 1 ice
                 Tenth pin: 1 ice, 3 blue, 2 white, 2 ice
                 Eleventh pin: 2 ice, 2 blue, 1 red, 3 ice
                 Twelfth pin: 8 ice
                 Thirteenth pin: 1 red, 6 ice, 1 red

                 Close each pin as soon as the last bead has been added.  Use Pliers to crimp
                 end (head) of pin closed.  Keep beaded pins in proper order 1 to 8.

                 Finish up:  With large pin closed, use knife or nail file to gently open
                 loop
                 in large pin.  Open loop just wide enough for looped end of a small safety
                 pin
                 to slide through.  Open pin.  Hold head of pin in left hand.  You will add
                 beaded pins to larger pin working from right to left.  Start with pin #8 and
                 slide onto large pin. Beads should be facing away from you. Slide remaining
                 beaded pins onto large pin (all going on the same direction.) Use pliers to
                 reclose loop in large pin.